Box News

Programmable Duration

Normally, for each frequency, a unit requires between one and three minutes of dwell time, or the amount of time the machine stays on or focuses on a frequency. The amount of dwell time that's needed depends on the penetration power of the unit, the subject's receptivity to the signal, the degree of pathogen resistance to the signal, and the condition being treated. In general, when a difficult condition is being addressed, such as cancer, longer periods are required. It's common to linger on a single tumor-dissolving frequency for 30 minutes or more. Frequencies for pain similarly require a long period. The time needed for each frequency may vary greatly. This makes rifling not only a science, but an art.

Many Frequencies in Succession (Memory)

All professionnally lanufactured Rife Therapy devices allow the user to program many frequencies in succession, and then sit back while the unit delivers them. This requires building more electronics into the unit, including a memory chip. However, some rifers, wanting to save money, buy cheap machines "at cost" that require the user to manually enter each frequency. For example, you program the first frequency to run for 3 minutes, the machine stops, you program the second frequency to run for 3 minutes, the machine stops, you program the third frequency, and so on. With this system, you are focused on programming and aren't able to relax while the machine is running. I think it's worth the extra liney to get a unit with memory.

Sweep Function

Holman defines sweeping with an analogy : "the shifting frequency to either side of a central ferquency, or the constant shifting back and forth of frequency between two separate frequencies, in much the same way one might envision a windshield wiper shifting back and forth to cover a larger area." The range on either side could be 1 Hz, 10Hz, or more. Sweeping is desirable because pathogens can mutate, and the most common number might miss its target by even just a little bit. Or, the machine operator might not be able to decide between two frequencies that are very close together. Or, there might be some frequencies fairly close together (for example, 435, 458, 465), and the subject wants to target them all, plus everything in between. The better frequency devices include a sweep feature. Later in this chapter, different types of sweeps are discussed. Some might be more effective than others, depending on the particulare machine being used.

- Nenah Sylver, The Rife Handbook of Frequency Therapy and Holistic Health, an integrated approach for cancer and other diseases (2011), p.526

The goal of all equipment should be a safe signal that will penetrate the body in a way that the body will accept. Too many people believe that more is better, bigger is better, more powerful is better. But blasting that harmful microbe with everything you've got, usually means bombarding the body; and this isn't optimal or even effective. It's understandable if rifers are tempted to blast, because people who are ill want to feel better immediately. However, the body's receiving the signal doesn't necessarily correspond to higher power levels. In fact, with biologically based medicine, the opposite is usually true. An excessively strong signal may be the wrong kind of output when the force of the signal is incompatible with the more nuanced energy of living cells. If the body does not like the signal, it will become resistant to it. The cell membranes will literally shut down bioelectrically and biochemically, and block the signal.
For optimal results with rife equipment, the signal must be readily passed from cell to cell so the tissues are beneficially affected at the same time that the pathogens are being destabilized (assuming that the signal is meant to affect them). Thus, a unit with the most power is not necessarily a good investment. You want a signal that's effective, and not simply forceful. (Note that there are two categories of power : what the unit draws from an electrical outlet or batteries, and what the device transmits to the user. So when claims about a unit's power are made, you need to know which type is being addressed.)
Although signal acceptance is a simple concept —the organism either receives the frequencies or it does not — there are several factors, more than one might think, that influence whether or not this takes place. As Jimmie Holman observes,

"The smallest changes to circuitry and components can dramatically affect the efficacy, operation and performance of the frequency device. Even slight manipulations of the waveform can have beneficial effects. It's the delivery system as well as the frequencies themselves that determine what the effects on the body will be."

Thus many companies equip their devices with setting that allow the user to select from a variety of wave shapes. For the theory behind waveform selection, see the Insert beginning page 523, "Signal Penetration : Wave Shapes, Harmonics, and Duty Cycles." Learning the theory is not essential to operating your machine, though; you can always read it later if these details are more than you want now.

- Nenah Sylver, The Rife Handbook of Frequency Therapy and Holistic Health, an integrated approach for cancer and other diseases (2011), p.522-526

The problem of cancer has attracted more attention during the past few decades since it is on the increase in every country in the world. Other diseases increasing are insanity, heart diseases, diabete and the anemias. Cancer gets more attention owing to tremendous amounts of pain in advanced stages and the stinking nature of the disease. The ancients called it the "stinking death". The dead part of the cancer is brought about by the fact that when cancer attains a certain size, it begins to die. The dead part is attacked by micro-organisms that are present in the blood and ready to attack any dead flesh. The poison from this rotting flesh eventually kills the person within whom the cancer grows.

Cancer becomes a dynamic growth that pushes itself forward into deeper structures and becomes a parasitic invader whose head is burrowing deeper while its tail is dead. All different degrees of life in the micro world exist between the invading front line of cancer virus and the dead zones that act as a sloughing, stinking mess from hard tumors to the growing and decomposing or the body's organic matter in which bacteria live on dead and decaying organic flesh known as saprophytism.

Cancer is feared to a greater extent and many fraudulent treatments are put out such as drugs, radiation, chelation of the blood in the vain hope of providing relief. Rebuilding the cells that have expired, detoxifying the cells that have been poisoned with nicotine, alcohol, and other millions of synthetics is now the obligation of Barley-green - a true cell food with live enzymes to cope with the polluting invaders.

The Government Document: 'The Dietary Goals for the United States' says that salt, sugar, fat, the high cholesterol foods, and too much meat are directly related to the destruction of 250,000 men, women and children every two months in this country alone !  It was published in Feb. 1977 . One out of two die of cardia-vascular disease and one out of four of cancer. [From page 100 of the book 'The Golden Seven Plus One' by C. Samuel West pub. by Samuel Publishing Co., Box 1051, Orem, Utah 84057.]

HOW CANCER STARTS ITS GROWTH BY LACK OF OXYGEN

Cancer is a disease that follows another disease. The part of the body that is damaged has a special soil in which the invader finds a favorable environment or it will not take root and grow. Dead cells becoming too negative in polarity, start the growth. Cancer is compared to a rotten log in a shady place where the rotten-ness, lack of light, lack of oxygen and lack of positive polarity, and lack of cell food bearing enzymes and good nutrition, all conspire to grow a parasite called poisonous toadstools. Overconcentration or under concentration of minerals in the soil and light stops toadstools dead.

(...) Royal R. Rife discovered that cancer virus was purple red in color and that to devitalize them he used a ray tube excited at 7,000 volts that gave off a purple red glow and transmitted a radio frequency of 40-milllion Hertz and as a carrier wave brought audio frequencies of 2128 Hertz to act as a sympathetic frequency to destroy the cancer virus without harm to human body cells or animal cells. With these forces he was able to clinically restore many cancer victims to good health from their doctor declared incurable states. The addition of Barley green, which was not available at his clinics in 1934 to 1939, would have greatly reduced the recovery time from 30 days to much less.

- Rife Manual – Rife-Crane – Holman & Dorneanu (2009), p.615-616 (PDF)

It was in "The New Microscopes" article that readers also learned about "certain lethal frequencies" : the fields emitted by the Rife Ray, which Royal Rife created eleven years after the debut of his Universal Microscope.

Under the universal microscope . . . tuberculosis, cancer, sarcoma, streptococcus, typhoid, staphylococcus, leprosy, hoof and mouth disease, and others [pathogens] may be observed to succumb when exposed to certain lethal frequencies, coordinated with particular frequencies peculiar to each individual organismm, and directed upon them by rays covering a wide range of waves. By means of a camera attachment and a motion-picture camera not built into the instrument, many "still" micrographs as well as hundreds of feet of motion-picture film bear witness to the complete life cycles of numerous organisms.

Rife designed several styles of ray equipment. There are at least four numbers that historian have used to designate the machines, but it wasn't clear when these units were begun or finished, or when they were formally used. We do know that the earliest one, built in the 1920s, killed E. coli (called B. coli then), a common bacterium that lives in the colon. Rife continued developing his ray equipment throughout the 1930s. In 1934, he built what some people today refer to as the Rife Ray #3. It was comprised of several bulky pieces that filled a large table in Rife's laboratory, making it not only difficult to move but also labor intensive to calibrate and operate. To produce the frequencies, the Rife Ray #3 used a Kennedy brand off-the-shelf radio receiver, which Rife also used as a transmitter. The Kennedy brand receivers were regenerative, which simply means that they had built-in components designed to amplify the electronic signal so it would be stronger. However as the Kennedy receivers were not shielded (more about this in a moment), other types were probably preferred in the final designs.
Frequencies were emitted from glass ray tube, which was mounted on a base on the outside of the cabinet and connected to the receiver. The ray tube used for the Rife Ray was similar to X-ray machine tubes of the era. However, it didn't produce X-rays because X-rays are created in a vacuum, and this ray tube contained an inert gas. Rife initially experimented with mixtures of different noble gases, including argon and krypton. He eventually chose helium because it withstood "many more hours of bombardment" than the other gases he tried. The gas-filled tube became brightly lit when a frequency of sufficent power was passed through it.
Presumed to have been more powerful than its predecessors, the Rife Ray #3 outputted about 50 watts to the tube. Fifty watts was enough power so that the frequencies emitted by the tube could penetrate through 15 inches of concrete. Even when the Rife Ray was one floor away from where the microscope stood, Rife demonstrated that after about ten minutes, every specimen beneath his microscope died after the machine was turned on briefly. The pathognes were devitalized not by the visible light emitted by the tube, but by the electromagnetic field, which includes electric and magnetic waves. Other bandwidth energies contributing to this effect may have included infrared and scalar waves (discussed in more detail shortly). Modern researchers sometimes refer to these combined field as the "Rife effect." The range of frequencies that Rife generally used were 190 KHz (kilohertz) to 12 MHz (megahertz).
Some components of the radio equipment included vacuum tubes. Housed inside the cabinet, the vacuum tubes were entirely different from the ray tube that was mounted on the outside of the cabinet. Vacuum tubes were somewhat fragile and bulky, used a lot of energy, and overheated easily. That is why engineers developed the transistor in the late 1940s. Unlike a hollow tube, the transistor was solid (hence the prase, "solid state technology"). Transisotrs possessed all the beneficial electrical properties of vacuum tubes without any of their shortcomings. They were sturdy, inexpensive and tiny, used very little power, and could immediately turn on without requiring any warm-up time. Today, virtually all electronic apparatuses (including electromedical devices) use solid state technology instead of vacuum tubes.

- Nenah Sylver, The Rife Handbook of Frequency Therapy and Holistic Health, an integrated approach for cancer and other diseases (2011), p.199

MOST frequencies are experimental Some of the entries contain long lists of frequencies, so it’s easy to become overwhelmed. Remember that many of these frequencies are experimental. Some rifers have found them helpful, while others didn’t notice many (or any) significant benefits. These numbers must be considered possibilities, rather than definites—unless the frequencies were calculated by Royal Rife himself, or in a laboratory using methods similar to those used by Rife, or by lab technicians who counted the growth or decrease of pathogen colonies after they were exposed to the frequency fields. However, a lab-tested frequency might not work for you if your equipment’s signal does not penetrate the body. And even if it does, there may be mutations in the pathogen depending on the terrain (you), and the larger environment (climate and geography). Focus on how you feel after your session. “Experimental” means that you observe, change your approach when necessary, and keep learning. These frequencies are guidelines only, a starting point.

- Nenah Sylver, The Rife Handbook of Frequency Therapy and Holistic Health, an integrated approach for cancer and other diseases (2011), p.606

Before You Do Anything Else 

Before actively trying to destabilize the cancer, seek help from a holistic professional to ensure that your detoxification and eliminative pathways (liver, lymph, kidneys, and colon) can handle the die-off that will occur from rifing. Use the programs under regeneration and healing to stimulate, support, and regenerate the eliminative channels, organs, glands, and overall system. 

Session Schedules: Rifing Is Your Priority 

Any cancer therapy schedule must be used aggressively. Cancer is persistent in its growth, so the means to stop it must be persistent as well. Healing may be expedited if sessions are at different times day to day. 

• Most Common Protocol: Regular Sessions Every Day with No Rest Intervals. Most people who successfully eliminate cancer tell me that they adhere to the following schedule: Two sessions every day, one in the morning and one in the mid or late afternoon. Sessions normally last between 1½ and 2½ hours each. (This means up to 5 hours a day of session time.) This twice-daily protocol is followed for at least 6 months. 

Does this seem like too much work? To some people, it is. They’d rather be doing something else than commit the time and energy that self-motivated healing requires. The above guidelines were developed because the elimination of cancer requires a very aggressive approach. It can take up to 10 days or 2 weeks to halt the spread of cancerous tissue before the body can then start to reverse the condition. Taking responsibility for your health requires patience. However, this means that you can very likely reverse the growth of your tumors— and have a far better chance to live a long time. 

• Alternate Protocol (Not Recommended!): Regular Sessions Every Day for 5 Days with 2-Day Rest Intervals. Some people who successfully eliminate cancer tell me that they always give themselves breaks between sessions as follows: Two sessions every day, one in the morning and one in the mid or late afternoon. Sessions normally last between 11 /2 and 21 /2 hours each. This twice-daily protocol entails 5 days on the machine, then 2 days off, to give the body time to eliminate accumulated waste materials. This schedule is followed for at least 6 months.

 The above protocol was promoted by a manufacturer whose staff noticed that some customers did well when they followed it. If you have different equipment, this protocol might not work for you—and even with the same unit, this protocol might not work. For cancer, my personal preference is to use the machine every day.
Don’t take any “days off” from doing sessions unless you have a very good reason for interrupting your rifing, and you are being monitored at least twice weekly by a skilled practitioner. Even brief gaps in sessions may allow the pathogens to mutate.

• Follow-Up Maintenance for Everyone. The Rife researchers I know recommend that after the cancer is gone—and the subject is either pronounced “cured” as established through lab reports, or the cancer is said to be “in remission”—the person follow a maintenance program.
(a) One rife session once a day for several weeks or one month. Then gradually add intervals of days, and then weeks, between sessions.
(b) One rife session every other day for several weeks or one month. Then gradually add intervals of days, and then weeks, between sessions.
(c) One rife session once a week for several weeks or one month. Then gradually add intervals of days, and then weeks, between sessions.

Whichever schedule you decide to follow, don’t stop your sessions prematurely. This includes taking a break just as you are starting to feel better. Continue rifing for one or two months even after all traces of cancer are gone! After, do a maintenance program until you see clear signs that you’re balanced. You will have high oxygen levels; normal pH in all tissues and fluids; high voltage in the cells; and blood free of debris with round, separate red blood cells and viable immune cells. Some friends of mine learned this lesson the hard way. They were treating their Labrador Retriever for bone cancer once every day. After three weeks, the dog, who had been lethargic and barely able to walk, was joyously running through the woods. The sessions appeared to eliminate his pain, even though a large tumor on one of his legs was still visible. Encouraged, my friends devoted less time to rifing their dog, even though I pleaded with them to continue with the same daily schedule. Then the unit suddenly stopped working and had to be shipped to the manufacturer for repairs. By the time it was returned—leaving an interval of eight days without sessions—the dog was limping again. My friends put him back on the same program, but the Rife Therapy no longer worked, and the noble creature died. Why did this happen? The buildup and transfer of energy takes time to achieve. The animal’s cancer was so advanced that after the sessions stopped, the owners simply didn’t have time to build up the momentum again—and the cancer sprang back, unchecked. Also, because the same program no longer appeared to have an effect, it’s probable that the pathogens had mutated. This story is not meant to scare you, but to emphasize that life-threatening conditions need attention. It took time for the cancer to develop, so you’ll need to take time to eliminate it.

- Nenah Sylver, The Rife Handbook of Frequency Therapy and Holistic Health, an integrated approach for cancer and other diseases (2011), p.676

In the United States alone, there will be an estimated 1,735,350 new cancer cases diagnosed and 609,640 cancer deaths in 2018. More than three people and at least one cancer death each minute. How horrible is that!

More and more scientists and biologists are discovering that resonant frequencies can destroy cancer cells. However, only a few people know that resonant frequencies cured 16 terminally ill patients with various cancers back in 1934. The first 14 patients recovered in just 70 days, and the remaining two recovered three weeks later. Incredibly, the patients only required two 3-minute sessions per week to achieve total recovery. This medical trial used frequency equipment designed by Dr. Royal Raymond Rife. Of course, the results aroused the attention of the entire medical community.

As a great scientist, inventor, and engineer, Dr. Rife was a genius. Based on his previous work, Dr. Rife believed that microorganisms, including bacteria, viruses, and parasites, were at the root of all disease. To prove his theory, Dr. Rife needed to observe these pathogens in their living state during his experiments. Some of these pathogens are incredibly small, particularly viruses. No equipment existed at that time to view them directly. As an outstanding mechanical engineer and microscopy expert, Dr. Rife made a microscope which could magnify 60,000 times. Better yet, the superior magnification was equaled by its resolution. Dr. Rife's microscope used monochromatic light that caused the organism to fluoresce. Rife could identify the virus he observed by the color they refracted.

A modern electron microscope can only view dead pathogens. Organisms are killed when they are prepared for viewing. Observing how organisms move and behave in real time provides valuable information. Because cell samples were still living while being observed, the Rife Universal Microscope was vital for the research of frequency treatments for disease.

Dr. Rife knew that everything vibrates at its own natural frequency. He believed that if he could discover the frequencies of disease-causing microorganisms, he could destroy them with the same vibrational frequency. In much the same way opera singers match the frequencies of wine glasses with their voice, and shatter them. On the basis of this theory, the 1934 medical trial proved that the Rife machine was (and still is) an effective cancer treatment system.

(Source: Spooky2.com)

Big Pharma uses the word “therapy” to divert attention from the inherent toxicity of radiation and conventional chemo—neither of which work. The radiation used for cancer is the same type of dangerous radiation emitted by nuclear reactors when they leak, so there’s never any good reason to expose yourself to it no matter what it’s called. (Note that Rife Therapy may not be able to repair all of the DNA damage caused by radiation.) Conventional chemo “therapy” [sic] consists of strong poisons (usually antifungal) that are administered either via intravenous drips or injection. The chemicals don’t remain at the tumor sites, but spread throughout the body. The rationale (and hope) is that the cancer cells will die from these poisons before the rest of the body does. However, what chemo actually does is very different from what we imagine or wish it does. Chemo suppresses immune function and impairs the liver’s ability to do its job, that of breaking down toxic substances into harmless byproducts. A cancer-ridden body is generally too weak, debilitated, and stressed to eliminate poisonous chemicals that the body was never designed to handle. Moreover, recent research has shown that chemo creates an environment favorable to tumor growth—so even if levels of cancerous cells initially decline, they can (and are mostly likely to) eventually spread. Rifing causes waste. This is why, for most people who have previously received chemo (or who are currently receiving it), rifing doesn’t work as well as it could work for people who haven’t had chemo at all. These detoxification issues don’t indicate anything negative about Rife Therapy; they simply demonstrate that the frequencies are doing their intended job. Should you insist on combining chemo with rifing, be careful. First, consult a qualified holistic practitioner to ensure that all detox channels (colon, kidney, liver and lymph) are functioning properly. Be aware that the energy fields from rife units can cause electroporation, or increased permeability of cell membranes. This means that higher levels of chemo will be escorted into the cancerous cells, increasing the potency of your usual dose. Therefore, your chemo dose will probably need to be lowered if you’re rifing. You must be carefully and consistently monitored to ensure that you’re receiving the correct amount. One rife manufacturer unofficially recommends waiting two to five days between chemo and the next rife session. In my opinion, waiting is counterproductive because during that period the pathogens could mutate. If you’re feeling so ill from chemo that you need to wait, I have to ask what you’re hoping to accomplish by receiving chemical poisons that have been proven not to eliminate cancer, and which are very likely making you sicker. Many people with cancer have told me that they sincerely believed Rife Therapy had merit. However, having received a grim prognosis from their doctor (not to mention intense pressure from distraught family members), they panicked, threw away their discernment, and underwent chemo—sometimes with rife sessions, sometimes without. Mindlessly following establishment medicine, they could no longer take responsibility for their health and therefore were unable to utilize rifing or other holistic protocols correctly. Under these circumstances, Rife Therapy was set up to fail. And it usually did. If your detox and elimination pathways are reasonably clear and your immune response has not been destroyed by anti-cancer agents, you have more options. There are a surprising number of viable alternatives to conventional chemo. Some enlightened doctors are achieving good results by administering low doses of chemicals locally along with heat, which makes tumors more vulnerable to being destroyed. There is already a history of heat being successfully used with the herb mistletoe, injected at the tumor site(s). A local toxicity rather than systemic toxicity always makes it easier for the body to handle any die-off from rifing. In Europe, cancer subjects have been able to accomodate a rife session on the same day as the administration of these highly localized therapies. It can be very helpful to hear about others’ experiences with rifing. Appendix A lists some Internet Rife Therapy support groups that you can join.

- Nenah Sylver, The Rife Handbook of Frequency Therapy and Holistic Health, an integrated approach for cancer and other diseases (2011), p.679

Found: Royal Rife’s Frequency For Cancer; and How To Use It

In the 1930s, Royal Rife discovered two cancer viruses. He called them the BX (Bacillus X) virus and the BY (Bacillus Y) virus. For a long time modern rifers believed that the BX was 11,780,000 Hz and the BY was 11,430,000 Hz. While these frequencies did yield success, the results weren’t as good as researchers hoped they would be—especially because the success rates did not compare to what Rife himself had achieved. Moreover, while the lab notes for the BX virus were found, the notes for the BY virus were not. Someone selling rife machines had posted the frequency for the BY virus on the Internet, but it wasn’t clear where that number had originated. To make matters more difficult, it turns out that notations for the BX virus—which had been available in Rife’s own handwriting—were incorrect. In 2016, the British Rife Research Group wrote a paper explaining the errors. Due to a number of technical errors because of limitations of his equipment, Rife had recorded the wrong frequency for BX in his lab notes. The actual frequency that Royal Rife should have recorded was 12,830,000 Hz. (Its lower octaves, for equipment that cannot reach that high, are in the next column.) This frequency was used in the clinic that Rife’s colleagues set up in 1934, which yielded mostly successful results for cancer subjects. The above number has been further refined by Dr. Richard Loyd, who reports that it not only works very well, but it also (inexplicably) destroys the BY virus. 

Sweeps. Sweeps catch mutations of stray pathogens. (Sometimes a sweep is notated “Sweep +/_ 200.” This means, run a sweep 200 Hz above and below the main signal.) To make sure that the signal lingers on a given frequency long enough, run it in small increments. For higher numbers in the MHz range, sweep +/_ 200 and use 0.1-Hz increments. For lower numbers in the Hz range, sweep +/_ 100 and use 0.01-Hz increments. These differences adjust for the frequency being used. Make sure to increase the duration of the session so you spend enough time on each frequency.

If your unit cannot reach the MHz range. To use lower harmonics of the MHz numbers, keep dividing by 2 until the range is within your machine’s capacity.

The best waveform to use. Set the machine for a square wave, which provides harmonics that can be useful when rifing for pathogens. (Sine waves as a rule don’t contain harmonics.)

- Nenah Sylver, The Rife Handbook of Frequency Therapy and Holistic Health, an integrated approach for cancer and other diseases (2011), p.672

Q. How do the frequencies work?

A. There are two ways in which the frequencies can be said to “work”: by negatively affecting the microbes, and by positively affecting the body. I’ll discuss the effects on microbes first.

One popular film sequence, which is often included in documentaries on Rife and shown on many Internet sites, depicts a protozoan “undergoing evisceration, membrane transport disruption, and disintegration” as it’s being exposed to a plasma wave of 1150 Hz. However, the actual shattering of a microorganism, although visually dramatic and certainly compelling, is likely the exception, rather than the rule, of how frequencies disable microbes. If a microorganism is not shattered outright, the frequencies may:

⬥ Disable specific enzymes or proteins in the microorganism.

⬥ Disrupt the microbe’s ability to metabolize, replicate or reproduce.

Now I will discuss the positive effects of frequencies on the body, independent of killing or disabling microbes. The frequencies appear to do one or more of the following:

⬥ Focus the attention of the body’s immune cells on an organism that was not previously recognized as a threat.

⬥ Normalize or stimulate various organs, glands, tissues, or body functions by beneficially reorganizing the RNA/DNA, or making the flow of ions across cell membranes more efficient.

The recently deceased Dr. Robert P. Stafford, who had worked with Royal Rife, John Marsh and John Crane, believed that the frequencies stimulated the adrenal glands besides providing other immune enhancing properties. Engineer and equipment builder Dave Felt likewise concentrates on the immune building properties of the frequencies. Ordinarily, when cells start to die from old age, infection or disrepair, fluid leaks out of the cell membrane. Other cells in charge of immune protection recognize this leakage as a message to scavenge what is now waste. Felt believes that the frequencies may cause or speed up the leakage of unhealthy cells, thus encouraging their removal. James Bare focuses on immune response as well, referring to studies showing that “pulsed EM fields activate heat shock proteins that act to stimulate the dendritic cells of our immune system.” Blast It! author Carol Nichols draws on her many years of experience working with pad devices. She writes that electrode units in particular “have a unique ability to stimulate atrophied muscle tissue, increase circulation of blood and lymph, stimulate regeneration of damaged nerve pathways, and rectify low tissue conductivity.” Peter Walker, who researches and reports on rife technology in Europe, also highlights pad devices, as they are extensively used by European doctors in their clinical practice. He writes, “Pad devices have a positive effect because they can tonify the body and help improve its energy levels. Plasma units are great for killing parasites.” And UK engineer Aubrey Scoon believes that “magnetic and electric fields are inducing electrochemical changes in cell membranes which affect electrochemical pumping mechanisms.”

However one explains the benefits of rifing, it’s clear that since we are electromagnetic beings, an electromedical device that causes the electrical charge of a cell to improve will assist with healing. Cells and other structures that are too weak or diseased to contain the charge that a healthy cell can hold, will lose their structural integrity and become part of the body’s waste load (as they should). Similarly, microbes that absorb too much energy (more than they can hold) will undergo a similar fate. A healthy body whose cells have the proper resistance, capacitance, and inductance— simply put, are functioning correctly and have the proper electromagnetic signature—will be impervious to microbes, and will perform their jobs efficiently. At some point, you may hear researchers talk about the rife effect. This effect can be any or all of the effects just described.

- Nenah Sylver, The Rife Handbook of Frequency Therapy and Holistic Health, an integrated approach for cancer and other diseases (2011), p.376-377