technology

► Chat GPT-4 : 

The reason it can take up to two hours to imprint water using the Spooky2 PEMF coil lies in the design and functionality of the device, as well as the physics of how electromagnetic fields interact with water. The Spooky2 PEMF coil is a low-power, gentle system, prioritizing safety and subtle biological effects rather than high-intensity imprinting. This approach naturally makes the process slower compared to devices specifically designed for rapid water imprinting.

When the PEMF coil generates low-frequency electromagnetic fields—often in the range of 0–30 Hz—it takes longer for these signals to influence water molecules. Low frequencies interact more subtly with the molecular structure of water, gradually aligning the molecules and influencing their energy states. Higher frequencies could achieve this more quickly but are generally less compatible with the biological applications for which Spooky2 is designed.

The process also often involves embedding a range of frequencies to create a complex energetic "signature" within the water. Each frequency in this range needs time to leave its imprint, particularly when cycling through multiple resonant frequencies. Water itself requires time to absorb and stabilize these electromagnetic signals. Subtle shifts in molecular alignment and hydrogen bonding don’t happen instantly, so the extended exposure helps ensure a more stable and lasting imprint.

Another factor is the design of the Spooky2 PEMF coil. It is compact and versatile, making it well-suited for a range of applications but not specifically optimized for rapid water imprinting. Larger or more powerful coils with stronger magnetic fields can accomplish imprinting much faster, but such devices are not the primary focus of the Spooky2 system.

The longer imprinting time has its advantages, as it allows the water to develop a deeper and more stable energetic imprint, which is less likely to dissipate due to environmental influences. However, if faster results are needed, there are ways to reduce the time, such as imprinting smaller volumes of water, using higher frequencies, or ensuring the coil is placed as close as possible to the water in a non-metallic, thin-walled container like glass.

Ultimately, the two-hour imprinting time reflects the balance between safety, precision, and effectiveness that Spooky2 aims to provide. While it may seem lengthy, this approach ensures a holistic and carefully calibrated process that aligns with the system's overall design philosophy.

Chat GPT-4 :

For a first scan using the Spooky2-XM generator, it's best to start with a straightforward and general scan to familiarize yourself with the process and understand how your body responds. Here’s a recommended approach:

1. General Biofeedback Scan

• Why?
  • It’s simple, comprehensive, and works well for first-time users.
  • Scans a broad frequency range to identify resonances in your body.
• Setup:
  • Use hand cylinders or TENS pads for biofeedback detection.
  • Connect them to the Spooky2-XM generator and follow the Spooky2 software instructions.
• Duration:
  • Typically takes around 30–60 minutes, depending on the scan parameters.

1. Prepare the System:

   • Ensure your Spooky2-XM generator is properly connected to your computer and power source.
   • Install and open the Spooky2 software.

2. Choose the Biofeedback Tab:

   • Go to the Biofeedback tab in the software and select General Biofeedback Scan.

3. Set the Frequency Range:

   • Use the default range (e.g., 0 Hz to 3 MHz) for a comprehensive scan.
   • For quicker scans, you can adjust to a smaller range (e.g., 76 kHz to 880 kHz).

4. Select Your Input Method:

   • If using hand cylinders, hold them firmly in both hands.
   • If using TENS pads, attach them to your wrists or other recommended areas for biofeedback.

5. Run the Scan:

   • Stay relaxed and still during the scan to minimize noise or interference.
   • Monitor the progress on the software interface.

6. Analyze the Results:

   • The software will provide a list of detected frequencies.
   • Save the results for future use or to create a frequency set for treatment.

• Hydration: Drink water before starting to enhance conductivity.
• Relaxation: Sit comfortably and stay calm during the scan to improve accuracy.
• Grounding: Avoid nearby electronic devices that may cause interference.

• Use the detected frequencies in healing programs or refine them with an Optimize Scan.
• Gradually explore other scan types, like Hunt and Kill or TENS Biofeedback, as you become more familiar with the system.

If you encounter any issues during the scan, feel free to share details, and I can guide you further!

Find the truth

The right frequencies can work miracles. The problem is that too many people are using the wrong frequencies. And when you’re handicapped in this way, the result can only be failure. In the beginning, there were no known frequencies. Every one had to be found, slowly and painstakingly, by trial and error. Over the years, large databases have been built up by a great many dedicated people, and these have improved things a great deal. But results can still be unacceptably poor. Errors in the databases, unrecognized organism mutations, incorrect diagnoses, and failure by early researchers to record the method of application or other important details are usually to blame. But there now exists a way to find the right frequencies for every subject, every time, in every situation. It’s called biofeedback, and it’s built into a handful of frequency machines. For a price that will take your breath away. But, thankfully, biofeedback is no longer only for the comfortable classes. Because now there’s Spooky Pulse. Spooky Pulse turns Spooky 2 into a powerful investigative tool capable of finding those elusive correct frequencies by interrogating your own body for them, and then applying its own answers to deal with the problem. We call this personal scanning. But Spooky Pulse has another two tricks up its sleeve that will help you to achieve better results every time.

The first of these is called program grading. This allows you to load any program, then very quickly input its frequencies to your body, one after another, while closely monitoring your body’s reaction to each one. When it’s done, Spooky 2 creates a new program with all the same frequencies, but now ranked according to how beneficial they will be for you. You can save this program, and omit frequencies that will do little good, saving time and energy, and getting you to a better state of health faster. 

Second, there’s optimize scanning. With this, you can load any program and treat with it. While this is happening, Spooky Pulse will sweep above and below each frequency in the program until it finds the exact value that works best for you Best of all, you can combine this with program grading to get a program with pinpoint frequency accuracy, with each frequency ranked according to how well it will work for you. No other biofeedback system available today offers these extraordinary abilities. Finally, it also allows you to muscle-test yourself quickly and reliably.

So Spooky Pulse doesn’t just do scanning for pathogens – it gives you a whole scanning toolbox that enables you to find anomalous frequencies, evaluate database and third-party programs, and find the exact frequencies that will do the job quicker and more effectively. What makes biofeedback so useful is this: labs make mistakes, but the body never lies – because it doesn’t know how to. Which leads us neatly into...

How biofeedback works

When the body encounters stress, it alters its own electrical fields through the autonomic nervous system. The results are changes in skin conductivity and heart rate. If I deliberately lie to someone, it creates stress in my body, and the results of this are easily picked up by a polygraph. There’s nothing the subject can do to prevent this since the autonomic nervous system is not under conscious control. And it doesn’t matter how slight or how minute the amount of stress is – the body reacts just the same. So if you input an ultrasound sweep into a subject’s body, and one or more of its frequencies produces a sympathetic resonance from, say, a pathogen or a parasite, the subject will always have a low-level stress reaction. This is picked up immediately and recorded by Spooky Pulse’s heart rate monitor.

When the sweep is done, Spooky Pulse will then go through its list of “hits” and, depending on your settings, may sweep carefully around them to find the exact frequencies which produce these tiny stress reactions. The final result will be a list of frequencies which can be saved as a program and used to deal with the problem effectively. Because now you have the right frequencies. You’ve found the truth – without taking out a second mortgage.

- Spooky2 Guide Scanning, p.3-4

Chat GPT-4 :

Yes, it is possible to perform a biofeedback scan with the Spooky2 system using hand cylinders, but there are a few considerations:

• The hand cylinders serve as electrodes to detect biofeedback signals (such as changes in impedance) from the body. These signals are used to determine frequencies that resonate with specific issues or imbalances.

1. Spooky2 Generator and Accessories:

   • A Spooky2 generator (e.g., Spooky2 XM or Scalar) and a biofeedback-compatible setup.

2. TENS Cables:

   • The hand cylinders connect to the generator through TENS cables.

3. Spooky2 Software:

   • Configure the biofeedback scan settings in the Spooky2 software. Select the scan type (e.g., Hunt and Kill, or General Biofeedback Scan).

4. Connection:

   • Hold the cylinders firmly in your hands to ensure proper contact. Alternatively, you can secure them using conductive gel for better signal quality if needed.

1. Connect the Cylinders:

   • Plug the TENS cables into the generator and attach the hand cylinders.

2. Prepare the Spooky2 Software:

   • Open the Spooky2 software and select the Biofeedback tab.
   • Choose the desired scan type and input the relevant settings (e.g., frequency range, scan duration).

3. Begin the Scan:

   • Follow the on-screen instructions to start the scan. Stay still during the process to minimize noise or interference.

4. Review Results:

   • After the scan, the software will display the detected frequencies. These can be used for further treatment or analysis.

• Signal Strength:

  • Hand cylinders may provide weaker signals compared to other methods, like the Spooky2 Pulse or TENS pads placed on the body. However, they are effective for general scans.

• Hydration:

  • Proper hydration enhances conductivity and improves the quality of the biofeedback scan.

• Alternative Methods:

  • For more precise scans, Spooky2 Pulse or direct TENS pads over targeted areas (e.g., wrists or chest) might yield better results.

If you're using hand cylinders, ensure the connections are secure, and follow the software's guidance for optimal results.

Chat GPT-4 : 

The time required to imprint water with a PEMF (Pulsed Electromagnetic Field) coil depends on several factors, including the frequency, intensity, and waveform of the PEMF device, as well as the volume of water and the desired level of imprinting.

In general, studies and anecdotal evidence suggest that:

1. Small Volumes of Water (e.g., a glass):

   • It can take 5–15 minutes using a standard PEMF coil at moderate settings.

2. Larger Volumes of Water (e.g., a liter or more):

   • It may require 15–30 minutes or longer, depending on the coil's power output and configuration.

3. High-intensity Devices:

   • High-power PEMF systems may imprint water in as little as 1–5 minutes, though these devices are less commonly used.

• Frequency Range: Lower frequencies (e.g., 7–15 Hz) are often associated with subtle biological effects and may require longer imprinting times.
• Waveform: Certain waveforms, like sine waves or square waves, may be more effective depending on the intended purpose.
• Proximity: Placing the coil closer to the water container generally increases the effectiveness.
• Material of Container: Glass or non-metallic containers are preferred to avoid interference with the magnetic field.

For optimal results, you may want to consult the specific guidelines provided by the manufacturer of your PEMF device or experiment to find the best settings for your purpose.

When Dr. Royal Raymond Rife invented his technology, he used radio as the transmission mode, and a conventional radio antenna as the actual transmitter.

However, he soon found he was able to get better results by using a plasma tube to transmit the frequencies. In later years, he actively considered plans to add DC electricity as a transmission mode via handheld electrodes because it didn’t interfere with local radio station reception or transmission.

Unfortunately for humanity, this was never to be, as the medico-pharmaceutical juggernaut, which stood to lose everything, systematically trashed his discoveries, his business, and his reputation as a scientist.

Thankfully, the principles behind this mode of transmission - called "contact" or "pad" mode - survived.

Today, more Rife enthusiasts use contact mode machines than any other type.

And with good reason, because this is a highly effective way to introduce frequencies into the body and get them working quickly. However, some have criticized contact mode, claiming that the "skin effect" prevents the current from penetrating deeply enough into the body.

This is essentially based on a misunderstanding of what the skin effect actually is.

In electronics, the outer surface of any electrical conductor, such as a wire, is called the "skin." The actual skin effect refers to the tendency of AC (alternating current) to flow close to this outer surface. The higher the frequency of the current, the more apparent the effect becomes. The problem it presents is that it increases the resistance of the conductor, making it less efficient.

Although human skin is resistant to electrical current flow, the term "skin effect" was never meant to refer to living flesh, but to materials used in the transmission of power.

However, the skin effect is not present to nearly the same extent when you’re transmitting DC electricity - which is what all Rife machines use.

With sufficient power, a well-designed Rife machine can deliver DC electrical energy deep enough into the body to reach all of its organs. Controversy remains, however, over whether this energy is capable of reaching the inner surfaces of hollow organs. Some researchers believe that DC energy doesn't actually need to do this because it’s the audio energy encoded into it that's important, and once this hits an organ’s outer surface, it will be transmitted by cell-to-cell and intercellular conduction to the entire organ.

Others prefer to rely on a different technique called plate-zapping, invented by Dr. Hulda Clark. Since this involves buying a pretty expensive piece of additional kit, we won’t go into it here. And frankly, we’re not convinced that it’s needed.

The bottom line is that contact mode using a properly designed Rife system works very well indeed, but if you prefer the "belt and braces" approach, you can always back up deep hollow organ experimentation by using Remote or Plasma Mode as well, both of which will penetrate the entire body.

Finally, Spooky2 has another trick up its sleeve. Plasma penetrates deep into the body because it uses a radio-band carrier wave, usually 3.1MHz or 3.3MHz. Spooky2 allows you to create a far better type of carrier - a dynamic carrier that’s harmonically related to the audio frequencies, which adds therapeutic value, and use this in Contact Mode.

Spooky2 has different kinds of contact accessories for different situations usage, including Spooky Conductive Carbonized Rubber Hand Cylinders, TENS pads, TENS Contact kit, TENS Internal Electrode, etc.
Using Spooky2 for Contact Mode is simplicity itself. Connect the contact accessory to the High Power port of Spooky Boost 3.1, which can combine both outputs and quadruple the power of Contact Mode.
 

(Source : Spooky2)

Spectronosod – informational remedy recorded on matrix – water, spirits, sugar. With Sensitiv Imago equipment it is possible to create such medication yourself.
Spectronosod is represented in the form of frequency characteristics (this can be information on medicine, information against microorganism, information of absolutely healthy organ), which are not directed at the patient’s organism during the state correction, but taken in due time.

There are 3 types of spectronosods:

1st type.
• Spectronosod of medicine
In the database are recorded frequency characteristics of medicine (allopathic, naturopathic, homeopathic, etc.). With the help of the equipment these frequency characteristics can be recorded on carrier (matrix), thus actually turning it into medication. This type of spectronosod keeps the same information as the medicine copy of which it is. The difference is that spectronosod does not include any chemical constituent of the medicine – so, it has no side effects.

2nd type
• Spectronosod of healthy organ
In the program database are recorded etalons of healthy organs. This information can be transferred to the carrier.
While accepting this information, it influences subcortical brain structures responsible for work of particular organs. In doing so, spectronosod “reminds” the organ how to function properly, that leads to the recovery of functions of the given organ.
As for their recording type, these spectronosods are called “straight” (information is transferred onto matrix with no alterations).

3rd type
 • “Inverted” spectronosods (in this particular case the information is carried out onto matrix with mirror reflection effect).
While perceiving information from an object, all information on pathological processes and stirrers, as well as harmful substances and processes, is recorded into the program database. This data can be used to prepare spectronosod against this information. When doing so, pathological information, being inverted, is recorded on matrix. Thus, when overlapping of the described frequency information with pathological one occurs, they mutually neutralize each other.

Spectronosod preparation can assist in achieving two goals at once:

1) an operator will be able to enhance the BRT or frequency compensation treatment effect;
2) in the periods between treatment courses an organism of the investigated person continues to get health-improving effect – intentionally.

(Source : SensitiveImago)

► According to ChatGPT :

"Spectronosods" are a term associated with bioresonance therapy and refer to informational remedies recorded onto carriers like water, alcohol, or sugar using specialized equipment. These remedies are intended to transfer specific frequency characteristics to influence the body positively. There are three types of spectronosods:

1. Medicine-based Spectronosods: These carry the frequency characteristics of various medicines (allopathic, homeopathic, etc.) without including their chemical components, which allegedly avoids side effects.

2. Healthy Organ Spectronosods: These transfer the frequencies of healthy organs to help remind the body how to function properly.

3. Inverted Spectronosods: These are designed to neutralize harmful or pathological information by using mirrored frequency characteristics to counteract the disturbances.

Spectronosods are used within the framework of bioresonance therapy, which operates on the principle that every cell emits electromagnetic frequencies. This therapy aims to detect and correct imbalances in the body's frequency patterns for therapeutic purposes.

Several beneficial effects of the electromagnetic information transfer through aqueous system (EMITTAS) procedure have previously been reported in vitro. The clinical potential of this procedure has also started to be evaluated. Information flow in biological systems can be investigated through chemical and molecular approaches or by a biophysical approach focused on endogenous electrodynamic activities. Electromagnetic signals are endogenously generated at different levels of the biological organization and, likely, play an active role in synchronizing internal cell function or local/systemic adaptive response. Consequently, each adaptive response can be described by its specific electromagnetic pattern and, therefore, correlates with a unique and specific electromagnetic signature. A biophysical procedure synchronously integrating the EMITTAS procedure has already been applied for the treatment of articular pain, low-back pain, neck pain and mobility, fluctuating asymmetry, early-stage chronic kidney disease, refractory gynecological infections, minor anxiety and depression disorders. This clinical strategy involves a single treatment, since the EMITTAS procedure allows the patient to continue his/her own personal treatment at home by means of self-administration of the recorded aqueous system. A significant and long-lasting improvement has been reported, showing a potential beneficial use of this biophysical procedure in the management of common illnesses in an efficient, effective and personalized way. Data from recent studies suggest that aqueous systems may play a key role in providing the basis for recording, storing, transferring and retrieving clinically effective quanta of biological information. These features likely enable to trigger local and systemic self-regulation and self-regeneration potential of the organism.

(Source : PubMed)

This post reviews the publication titled “Experimental Finding on the Electromagnetic Information Transfer of Specific Molecular Signals Mediated Through the Aqueous System on Two Human Cellular Models” by Foletti et al. This study is an extension of their previous findings related to Electromagnetic Information Transfer.

What is the purpose of the study?

The purpose of the study is to further investigate whether water is able to record, store, and transfer electromagnetic information signals from biologically active substances, in this case, retinoic acid, to cells.

What did the authors do?

The authors examined the effects of the electromagnetic information signals from retinoic acid (a differentiating agent) on the morphological and biochemical properties of two types of human cancer cells: neuroblastoma (LAN-5) and teratocarcinoma (NT2/D1). 

In essence, the two types of cancer cells were grown in an aqueous medium which was “charged” with electromagnetic signals from retinoic acid, and after 5 days of incubation various properties of the cells were examined. To compare, controlled experiments (i.e. cancer cells grown in a “non-charged” aqueous medium) were also performed.

What did the study reveal?

One finding was that there was a significant difference between the control cells and the electronically treated cells with respect to cell metabolism. In fact, the cells grown in the “charged” aqueous medium showed a decrease in metabolic activity compared to the control group.

Another finding was that the electronically treated cells were morphologically different than the control group – the cells grown in the “charged” aqueous medium looked like they were chemically treated with retinoic acid.  

Overall the authors concluded that using the electromagnetic signals from retinoic acid and an aqueous system, it is possible to affect and treat cancer cells.

What does this mean?

The evidence presented by Foletti et al. are in line with the pioneering work of Jacques Benveniste and although further experimental work is needed to fully understand the biophysical mechanisms involved in the entire process, these results do provide preliminary evidence that supports the future use of informational medicine and electromagnetic signatures, such as ICs, in the clinical world.

(Source : Infopathy.com)

Imagine an external device that could have the same effect, when pointed at a tumor, as a cancer drug. It may sound like science fiction, but a Seattle startup is already making this technology a reality.

Bioelectronics company Nativis is developing a medical technology platform that uses electromagnetic fields to mimic the effects of drugs, and the company has just finished raising $10 million to help it develop the tech. That brings its total funding to $60 million, all raised from angel investors, Nativis CEO Chris Rivera told GeekWire. The company was founded in 2002 by brothers and entrepreneurs John and Mike Butters, and after a decade developing the underlying technology, Nativis has started to test its device in human patients. “We can, we believe, replicate the effects of chemicals and drugs and modulate metabolic pathways as if a chemical or drug was present, but through electromagnetic fields,” Rivera said.

In other words, the system works by detecting subtle changes in the electromagnetic fields that surround molecules, known as a molecule’s ultra-low radio-frequency energy (ulRFE) profile. These small charges are important as they are how molecules in the body interact with each other. After collecting information on a cell’s profile, the company’s Nativis Voyager device can then single out specific kinds of molecules and alter their profile to have the same effect a drug would have when interacting with that molecule.
“This is the most novel, disruptive technology I’ve seen in my career, and assuming we can continue to do what we’re doing in vitro, in vivo, and now in humans, it has the potential to totally disrupt how we treat patients,” Rivera said. In theory, the tech could be used to attack tumors and other cancerous cells without the need for surgery or the toxic side effects of chemotherapy. It could also be used to target chronic conditions like inflammation and chronic pain. In practice, it is still very early to make a call. The device is first being studied in patients with a kind of recurring brain cancer, and those trials have advanced to the feasibility stage of testing, the first of three stages mandated by the FDA. Rivera said he was optimistic about the early results of these trials. Other clinical trials that are testing the device as a treatment for other kinds of cancer, Rheumatoid Arthritis, and chronic pain, are still in the pre-clinical stage, testing for safety.

The company has also added several high-profile biotechnology and health leaders to its board of directors in the past month, including former CFO of the Bill and Melinda Gates foundation Richard Henriques.

Rivera joined the company as its CEO a year ago. He spent the previous seven years as CEO of the Washington Biotechnology and Biomedical Association. Nativis employs about a dozen at its offices in Seattle’s South Lake Union neighborhood.

(Source : GeekWire)